$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2012.002.1 |
| Compatible Car | AUDI A4 S4 8W### |
| Product Description | Model year: 2016-02- Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seat position sensor must be relocated. The seating position will be approximately 15mm higher than the lowest position of the factory seat height adjustment function, and approximately 55mm lower than the highest position of the factory seat height adjustment function. (When using the New LX-F). The handle offset of the Recaro seat is the same as the factory seat. The slide amount is approximately 30mm less forward than the factory. Notes / Interference information: At the very front of the seat slide position, there is a weak interference of 1-5mm between the center console and the front end of the seat cushion for the AM190 series such as Sportster/Cross Sportster, the IS-84 series such as Orthoped, LX, ERGOMED-D/E/LD, MV, and the IS-05 series flat cushion type such as the New LX-F and SR-7F. For the AM19 series such as SPORT/STYLE/TREND and the IS-05 series such as SR-6/7/11, the center console and the front end of the seat cushion will interfere with each other by 6-10 mm. Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. B9 driver's seat. Side airbag canceller included. The B9 is equipped with advanced functions and requires specialized knowledge for installation, so please have it installed at a specialty store. (If installed carelessly, a warning light will come on while the seat is installed and you will need to turn it off. For details on installation, please refer to the precautions in the installation manual. The contents described were verified on a vehicle in November 2016.) The passenger seat is only for the driver's seat because the warning light will come on due to the seat occupancy sensor. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
