$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2013.031.2 |
| Compatible Car | PORSCHE BOXSTER 718 |
| Product Description | Model year: 2016-06- Special notes: The factory seat built-in side airbag function will be lost. The airbag warning light needs to be turned off. The seating position is almost the same as the lowest position of the factory seat (when using ST-JJ). The handle offset is about 10mm toward the door side (the Recaro moves closer to the door side). The amount of sliding backwards is reduced by about 25mm compared to the factory. Notes / Interference information: For SR-6, 7, 7F, 11, Sportster, and Cross Sportster, the reclining dial interferes with the floor behind the sliding position. For Style, Sport-J, JJ, and JC, the backrest side and center console interfere with the door armrest by about 5 to 10mm, and the reclining dial interferes with the floor behind the seat sliding position, so the center console side side cover needs to be removed. For Style, Sport-D, and DC, the backrest side and center console interfere with the door armrest by about 5 to 10mm, and the center console side side cover needs to be removed. For SP-#N, the belt buckle interferes with the center console. If you are more concerned about the handlebar offset than the seating height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (Please consult your dealer regarding interference with the console side (shift, etc.) when installing.) For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Cannot be installed Compatible seats: LX-F (IS-05 base) Pro Racer RMS RMS should be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be mitigated by adjustment. RCS RCS should be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・RCS side adapter (product number 1700003J) ・RCS stainless steel side adapter set (product number 1700004J) SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included |
| Notes | Images are for illustration purpose only. Actual product may vary. |
