RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR BMW 1 F40 M135 7L20 2014.003.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2014.003.1

BMW 1 F40 M135 7L20

Model year: 2019-11-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 10mm lower than the lowest position of the factory seat height adjustment function. (When using the New LX-F). The Recaro steering wheel offset is 15mm closer to the door. It is 10mm closer to the door compared to the factory seat. The passenger seat is offset further toward the door to reduce interference with the center console in front of the seat slide. The slide amount is reduced by approximately 30mm compared to the factory.
Notes / Interference information: For SP-#/Racer, the seat backrest shoulder interferes with the B-pillar. Please use the SP-G offset adapter set (product number 1600094J) to avoid interference with the B-pillar. The RMS can be adjusted to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RMS side adapter. When installing RS-G/TS-G, if you are concerned about the steering wheel offset rather than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. F44. Side airbag canceller included. Compatibility with 118i (7K15) and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.