$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2014.003.1 |
| Compatible Car | BMW 2 F44 7L20 |
| Product Description | Model year: 2019-10- Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 10mm lower than the lowest position of the factory seat height adjustment function. (When using the New LX-F). The steering wheel offset of the Recaro is 15mm closer to the door. It is 10mm closer to the door compared to the factory seat. The passenger seat is offset further toward the door to reduce interference with the center console at the front of the seat slide. The slide amount is reduced by approximately 30mm compared to the factory. Notes / Interference information: The following seats have different restrictions for the driver's seat and passenger seat because the consoles of the vehicle are different on the left and right. When installed on the driver's seat, the side of the seat cushion will interfere with the center console from approximately 30mm from the front end of the slide. For the Sportster, the interference is approximately 10mm. For the SR-6, 7, and 11, the interference is approximately 4mm. Both the driver's seat and passenger seat require the SP-#, and the Racer requires the SP-G offset adapter set (product number 1600094J). When installing the RS-G/TS-G, if you are more concerned about the handlebar offset than the seating height, you can adjust it by using the separately sold offset adapter (product number 1700001J). The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter. The RCS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter before installation. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Gran Coupe F44. Side airbag canceller included. Confirmed with model 7L20. Compatibility with other models and vehicles equipped with options has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
