RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR BMW MINI CROSSOVER F60 YT20 YU15 2014.004.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2014.004.1

BMW MINI CROSSOVER F60 YT20 YU15

Model year: 2017-02-
Special notes: The side airbag function built into the factory seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. The seating position will be approximately 8 mm higher than the lowest position of the factory seat height adjustment function, and approximately 54 mm lower than the highest position of the factory seat height adjustment function. (When using the New LX-F). The steering wheel offset is approximately 11 mm closer to the door from the steering wheel center, and the Recaro is approximately 30 mm lower than the factory.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) allows the steering wheel offset to be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For the AM19 SPORT, STYLE, and TREND models, the IS-05 SR-6, 7, and 11 models (excluding 7F), and the Orthoped, the front end of the seat slide interferes with the seat cushion by a few mm. For the RMS, please use the separately sold RMS side adapter to adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, please use the separately sold RCS side adapter to adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installation. Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. F60. Side airbag canceller included. Compatibility with vehicle models and optional equipment has not been confirmed.

Images are for illustration purpose only. Actual product may vary.