RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR BMW X2 F39 YH20 YH15 2014.004.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2014.004.2

BMW X2 F39 YH20 YH15

Model year: 2018-04-
Notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is approximately 5mm higher than the lowest position of the factory seat height adjustment function, and approximately 55mm lower than the highest position of the factory seat height adjustment function. (When using New LX-F). The steering wheel offset is approximately 13mm closer to the door compared to the factory seat on the driver's side. The passenger seat is offset further toward the door to reduce interference with the center console at the front of the seat slide. The slide amount is approximately 20mm less than the factory.
Notes / Interference information: For seats with high seat cushion sides such as SR-6/SR-7, the seat cushion side and center console will slightly interfere with each other at the front position of the seat slide. For RS/TS-# series, the steering wheel offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.)). The center console shape is asymmetrical, so the offset of the base frame is different on the left and right. (The driver's seat is closer to the console than the passenger seat.) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, any interference with the interior can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro Vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types: a separately sold side adapter set or an offset adapter set for RS/TS-G. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. F39. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.