RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR BMW 2 F46 6V15 2014.004.2

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2014.004.2
Compatible Car
BMW 2 F46 6V15
Product Description
Model year: 2015-05-
Notes: The factory seat built-in side airbag function will be lost. The airbag warning light must be turned off. The seating position will be approximately 6mm lower than the lowest position of the factory seat height adjustment function. (When using the New LX-F). The Recaro steering wheel offset is 8mm closer to the door. The passenger seat is offset further toward the door to reduce interference with the center console at the front of the seat slide. The slide amount is reduced by approximately 30mm compared to the factory.
Notes / Interference information: The following seats have different restrictions for the driver's seat and passenger seat because the consoles on the left and right sides of the vehicle are different. When installed on the driver's seat, the side of the seat cushion and the center console will interfere from the very front end of the slide. For the Sportster, the interference is approximately 10mm from the 30mm front end of the slide. For the Cross Sportster, the interference is approximately 5mm from the 30mm front end of the slide. For the SR-6, 7, and 11, the interference is approximately 3mm at the front end of the slide. For the SR-7F and LX-F, the interference is weak. When installing RS-G/TS-G, if you are more concerned about the handlebar offset than the seating height, you can adjust it by using the separately sold offset adapter (product number 1700001J). The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter. The RCS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Gran Tourer F46. Diesel vehicles not confirmed. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.