RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR BMW 4 G22 G82 M4 12AR20 52AZ30 FOR RIGHT-HAND DRIVE 2014.009.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2014.009.1

BMW 4 G22 G82 M4 12AR20 52AZ30 FOR RIGHT-HAND DRIVE

Model year: 2020-10-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is the same as the lowest position of the factory seat height adjustment function, and is approximately 65 mm lower than the highest position of the factory seat height adjustment function. (When using New LX-F). Steering wheel offset is center. On the driver's side, the seat is 7 mm closer to the center than the factory seat. The slide amount is approximately 25 mm less than the factory. The seat belt guide assist arm mechanism installed on some grades must be canceled to avoid interference with the shoulder part of the Recaro seat.
Notes / Interference information: For Sportster, Cross Sportster, SR-6/7/7F/11, the shoulder part and B-pillar interfere by a few mm. For SP-# and Racer, an SP-G offset adapter set (product number 1600094J) is required. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. G22. Right-hand drive vehicle. Please note that left-hand drive vehicles are set differently. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.