$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2014.067.2 |
| Compatible Car | BMW MINI CROSSOVER R60 |
| Product Description | Model year: 2011-01-2017-02 Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is the same as the lowest position of the factory seat (when using ST-JJ). The seat offset is almost the same as the factory seat position. (= Approximately 10 mm from the center of the steering wheel toward the door (Recaro moves toward the door).) The amount of sliding backwards is reduced by approximately 13 mm compared to the factory. If you are installing a RECARO seat on the passenger seat, but only on vehicles equipped with a seating sensor on the passenger seat, a separate part is required. *Since there are vehicles without seating sensors, please check in advance whether or not you have one. If you are installing a Recaro seat on a passenger seat equipped with a seating sensor, you will need to have a Recaro dealer install the separately sold naviseat selector type 2-A (product number 7215870). Notes / Interference information: When installing SP-# on the passenger seat, the shoulder part will interfere with the B-pillar by about 5 mm. There is no interference with the driver's seat. For RS/TS-# series, the steering wheel offset can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm using the RS/TS-G offset adapter set (product number 1700001J). (Please consult your dealer regarding interference with the console side (shift, etc.) when installing.) For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Can be installed on the right hand side of the left seat or the left hand side of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. R60. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
