RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR CHRYSLER AMC JEEP WRANGLER JL20L JL36L JL36S RIGHT-HAND DRIVE VEHICLES 2062.001.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2062.001.1
Compatible Car
CHRYSLER AMC JEEP WRANGLER JL20L JL36L JL36S RIGHT-HAND DRIVE VEHICLES
Product Description
Model year: 2018-10-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off.
Notes / Interference information: The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. For RS/TS-# series, please use the RS/TS-G offset adapter set (product number 1700001J). For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. The B-pillar and the shoulder part of the seat interfere with each other on some models. The interference can be reduced by moving the seat belt shoulder anchor on the B-pillar upwards. 5-10mm for SR-6/7/7F/11, Sprtster/CrossSportster. The door armrest and backrest side interfere with each other by a few mm on Sport/Style and 9 mm on Trend.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro Vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・RCS side adapter ・RCS stainless steel side adapter set AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W RS/TS-# series requires RS/TS-G offset adapter set . *Normal side adapter (Product number 1700000J) cannot be used. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.