RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA COROLLA FIELDER COROLLA AXIO E160 161 161G 162G 165G 2080.004.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.004.2

TOYOTA COROLLA FIELDER COROLLA AXIO E160 161 161G 162G 165G

Model year: 2012-05-2019-09
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 9mm higher than the lowest position of the factory seat height adjustment function, and approximately 15mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). The seat lateral position is the same for the factory seat and Recaro. The steering wheel offset of the factory seat and Recaro is approximately 10mm depending on the door side.
Notes / Interference information: For RS/TS-# series, the steering wheel offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.)) For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A Side Adapter Set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of offset adapter sets for RS/TS-G or the side adapter set sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. For 2WD vehicles. Including hybrids (HVs). Compatibility with cold weather models, 4WD vehicles, and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.