$287.95 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2080.009.2 |
| Compatible Car | TOYOTA LEXUS IS 250 350 F GSE USE 20 21 |
| Product Description | Model year: 2005-09-2013-08 Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. The seating position is almost the same as the factory seat (when using the New LX-F). The seat offset is about 10mm toward the door (the Recaro seat moves closer to the door). The forward slide amount is about 20mm less than the factory seat. The driver's seat position sensor must be relocated. If a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on. Vehicles equipped with the factory option "Mark Levinson" premium sound system have not been confirmed. Notes / Interference information: For SR-1 and 2, the shoulder part interferes with the B-pillar by about 10 to 15 mm. For A-8, the shoulder part interferes with the B-pillar by about 5 to 10 mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. If you are more concerned about the handlebar offset than the seating height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For the RMS, adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD vehicles. Side airbag canceller included. Cannot be installed on vehicles equipped with pre-crash safety systems. Passenger seats on vehicles with position memory must be relocated. Cannot be installed on IS250C (convertible vehicles). Product number changed in September 2015. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
