RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA YARIS CROSS MXPB15 MXPB10 MXPJ15 MXPJ10 2080.011.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.011.1

TOYOTA YARIS CROSS MXPB15 MXPB10 MXPJ15 MXPJ10

Model year: 2020-08-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is approximately 5mm lower when using the center position of the 3-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The Recaro seat steering wheel offset is approximately 15mm toward the door from the center of the steering wheel (12mm toward the door than the factory seat). The slide amount is 40mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on.
Notes / Interference information: When installing a Sportster, the side of the seat cushion and the center console will interfere with each other by approximately 5mm at the front end of the slide. Both the driver's and passenger's seats require the SP-#, and the Racer requires the SP-G offset adapter set (product number 1600094J). When installing RS-G/TS-G, if you are concerned about the steering wheel offset rather than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with models and vehicles with options other than those listed has not been confirmed.

Images are for illustration purpose only. Actual product may vary.