$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2080.020.2 |
| Compatible Car | TOYOTA HARRIER ZSU ASU60 65 |
| Product Description | Model year: 2013-12- Special notes: The side airbag built into the factory seat will no longer function. Vehicles equipped with side airbags will need to have the airbag warning light turned off. If a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be on. The seating position will be approximately 13mm higher when using the center position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function. (Adjustable 13mm up and 13mm down). (When using New LX-F). The seat slide amount is approximately 20mm less than the factory seat. The seat offset is the same as the factory seat. Notes / Interference information: The console and seat cushion will interfere with each other when the seat slide is in the forward position. SR-6, 7 (except 7F), 11, TREND, STYLE, SPORT, and Orthoped are approximately 5-10mm apart. SR-7F, New LX-F, old LX, and ERGOMED have weak interference due to individual differences. Also, for older LX and ERGOMED models, the recliner dial interferes with the console, so you will need to replace the recliner dial on the center console with a thin recliner dial (product number 1600090J). For the RMS, please adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is interference with the interior, this can be alleviated by making adjustments. For the RCS, please adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 height settings (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Classic LX Pepita / Classic LX Spektrum Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LX-F (IS-05 base) LS / LS-# / LT-# Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・RCS side adapter (product number 1700003J) ・RCS stainless steel side adapter set (product number 1700004J) SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set (product number 1700000J) separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) must be purchased separately. AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with hybrid vehicles and vehicles with optional features has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
