RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA HILUX GUN125 2080.021.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2080.021.1
Compatible Car
TOYOTA HILUX GUN125
Product Description
Model year: 2017-09-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is 20mm higher when using the center position of the 3-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The steering wheel offset moves the Recaro seat about 4mm toward the door from the steering wheel center. The slide position is 30mm shorter than the factory. If a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For the RMS, adjust the position to the optimum position (front/rear height, left/right offset 0/5/10mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.