RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA C-HR ZYX10 NGX50 NGX10 SPORTS FRAME 2080.024.1

$269.00 SGD $28,600.00 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2080.024.1
Compatible Car
TOYOTA C-HR ZYX10 NGX50 NGX10 SPORTS FRAME
Product Description
Model year: 2016-12-
Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. The seating position is approximately 23mm higher when using the adapter frame compared to the lowest position of the factory seat height adjustment function (approximately 15mm lower when not using the adapter frame). (When using New LX-F). The steering wheel offset of the Recaro seat is in the center of the steering wheel (5mm more centered than the factory seat). The slide amount is 40mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on.
Notes / Interference information: For the following seats, the side of the seat cushion and the center console will interfere with each other when the passenger seat is slid forward. For SPORT, STYLE, and TREND JJ, JC, and DC, it is approximately 3-8mm, and for SR-6, 7, and 11, it is approximately 5mm. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type.
Armrest: Can be installed on the right hand side of the left seat or the left hand side of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame (with adapter frame) and side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.