$269.00 SGD $28,600.00 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2080.024.1 |
| Compatible Car | TOYOTA YARIS KSP210 MXPA1# MXPH1# SPORTS FRAME |
| Product Description | Model year: 2020-04- Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is approximately 36 mm higher when using the adapter frame compared to the lowest position of the factory seat height adjustment function (2 mm lower when not using the adapter frame). (When using New LX-F). The Recaro seat's handle offset is approximately 16 mm toward the door from the center of the handle (14 mm toward the door than the factory seat). The slide amount is 40 mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on. Notes / Interference information: The following seats have different consoles on the left and right sides of the vehicle, so the side of the seat cushion and the center console will interfere with each other when the passenger seat slides forward. For the Sportster, there is a maximum of 10 mm of interference from around 50 mm from the front end of the slide, and for the SR-6, 7, and 11, there is approximately 3 mm of interference from around 20 mm from the front end of the slide. Both the driver's seat and passenger seat require the SP-#, and the Racer requires the SP-G offset adapter set (product number 1600094J). When installing the RS-G/TS-G, if you are more concerned about the handlebar offset than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter. The RCS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter before installation. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame (with adapter frame) and side airbag canceller included. Compatibility with models and vehicles with options other than those listed has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
