$282.30 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2080.024.2 |
| Compatible Car | TOYOTA GR YARIS GXPA16 MXPA12 SPORTS FRAME |
| Product Description | Model year: 2020-07- Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is approximately 18 mm higher when using the adapter frame compared to the lowest position of the factory seat height adjustment function (20 mm lower when not using the adapter frame). (When using New LX-F). The Recaro seat handle offset is approximately 20 mm toward the door from the center of the handle (6 mm toward the door than the factory seat). The slide amount is 40 mm shorter than the factory. If a Recaro seat without SBR is installed on the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on, but if a Recaro seat with SBR is installed, the function will be maintained as is. Notes / Interference information: The following seats have different consoles on the left and right sides of the vehicle, so the seat cushion side and center console will interfere with each other when the passenger seat is slid forward. For Sportster, interference is a maximum of 10mm from 50mm from the front end of the slide, and for SR-6, 7, and 11, interference is about 3mm from 20mm from the front end of the slide. SP-# is required for both the driver's and passenger's seats, and SP-G offset adapter set (product number 1600094J) is required for Racer. When installing RS-G/TS-G, if you are concerned about the handlebar offset rather than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). For RMS, you can adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. GR Yaris. Confirmed to be compatible with the MC model. The seating position has been lowered by 25mm with the factory seat compared to before the MC model. Sports frame (with adapter frame) and side airbag canceller included. Compatibility with models and vehicles with optional items other than those listed has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
