RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA COROLLA COROLLA NRE210 W ZWE211 W ZRE212 W ZWE214 W SPORTS FRAME 2080.024.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.024.2

TOYOTA COROLLA COROLLA NRE210 W ZWE211 W ZRE212 W ZWE214 W SPORTS FRAME

Touring
Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. The seating position is approximately 32mm higher when using the adapter frame compared to the lowest position of the factory seat height adjustment function (approximately 6mm lower when not using the adapter frame). (When using the New LX-F). The Recaro seat handle offset is approximately 15mm toward the door from the center of the handle (12mm toward the door than the factory seat). The slide amount is 40mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on.
Notes / Interference information: For the following seats, the side of the seat cushion will interfere with the center console when the passenger seat is slid forward. For SPORT, STYLE, and TREND JJ, JC, and DC, it is approximately 10-15mm, for SR-6, 7, and 11 it is approximately 13mm, and for SR-7F, LXF, old LX, and Ergomed it is approximately 5mm. Both the driver's seat and passenger seat require SP-#, and the Racer requires the SP-G offset adapter set (product number 1600094J). When installing RS-G/TS-G, if you are more concerned about the handlebar offset than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). For the RCS, adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame (with adapter frame) and side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.