RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA COROLLA SPRINTER E100 110 LEVIN TRUENO CERES MARINO 2080.030.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.030.2

TOYOTA COROLLA SPRINTER E100 110 LEVIN TRUENO CERES MARINO

Model year: 1991-06-2000-12
Special notes: The seating position is approximately 10mm lower than the original seat (when using ST-JJ).
Precautions/Interference information: For CS, CSE, CT, and C-clutch, the seating position will be higher due to the spacer used after removing the recliner cover on the center console side. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CSE Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CT Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle C-Classic Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Levin, Trueno, Ceres, Marino

Images are for illustration purpose only. Actual product may vary.