RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA HARRIER MXUA80 AXUH80 2080.032.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.032.2

TOYOTA HARRIER MXUA80 AXUH80

Model year: 2020-06-
Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will not be turned on. The seating position is 26mm higher when using the center position of the Recaro's three-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down) (when using New LX-F). The Recaro seat's handle offset is 3mm closer to the console than the factory seat (improved compared to the factory seat's offset of 11mm). The slide amount is 20mm shorter than the factory seat.
Notes / Interference information: Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing it. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items such as heaters has not been confirmed. 4WD vehicles have not been confirmed.

Images are for illustration purpose only. Actual product may vary.