RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA RAV4 MXAA52 MXAA54 AXAH52 AXAH54 AXAP54 2080.032.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.032.2

TOYOTA RAV4 MXAA52 MXAA54 AXAH52 AXAH54 AXAP54

Model year: 2019-04-
Special notes: The side airbag built into the factory seat will no longer function. Vehicles equipped with side airbags will require the airbag warning light to be turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. The seating position is 13mm higher when using the center position of Recaro's three-stage adjustment compared to the lowest position of the factory seat's height adjustment function (adjustable 13mm up and 13mm down) (when using New LX-F). The Recaro seat's handle offset is 4mm closer to the door than the factory seat. The sliding position is 20mm shorter than the factory.
Notes / Interference information: The passenger seat interferes at the front of the sliding position. SPORT/STYLE/TREND-JC/JJ/DC: 8-13mm, SR-6/7/11: 11mm, SR-7F/LX-F/old LX series and ERGOMED series: 3mm, Sportster/Ortho: 6mm, Cross Sportster: approx. 1mm. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items such as heaters has not been confirmed.

Images are for illustration purpose only. Actual product may vary.