RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA MARK II CHASER X100 2080.089.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.089.2

TOYOTA MARK II CHASER X100

Model year: 1996-09-2000-09
Special notes: Trunk opener needs to be modified.
Cautions / Interference information: D, DS, DSE should be installed with backrest width adjustment at its narrowest setting. SR-1, 2, 3, 4, 5, Trend, Sport's J, JJ, JC, D, DC have about 5-10mm interference between the seat cushion side and center console and door armrest. RMS should be installed after adjusting to the optimum position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. RCS should be installed after adjusting to the optimum position (front-rear height, left-right offset 0/5/10mm) with the separately sold RCS side adapter.
Position: New structure frame. One-position type.
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
D / DH / DV
DS / DS-H / DS-V / ES-V/DSE
Pro Racer RMS For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold side adapter set (product number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. 2WD vehicles (4WD vehicles can only be installed on the driver's seat)

Images are for illustration purpose only. Actual product may vary.