$268.06 SGD
| /
Brand | RECARO |
Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
Product Number | 2080.169.2 |
Compatible Car | TOYOTA NOAH VOXY AZR60 65 |
Product Description | Model year: 2001-11-2007-05 Special notes: When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not come on. There is no need to relocate the factory navigation computer under the left seat. The seating position is almost the same as the lowest position of the factory seat (when using the ST-JJ center hole). Not confirmed for the Welcab series. Notes / Interference information: Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, and for the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic D / DH / DV DS / DS-H / DS-V / ES-V/DSE Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. No side airbags. Includes cold weather specification vehicles and vehicles with rear heaters. |
Notes | Images are for illustration purpose only. Actual product may vary. |