RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA ALTEZZA ALTEZZA GITA SXE GXE10 2080.361.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.361.2

TOYOTA ALTEZZA ALTEZZA GITA SXE GXE10

Model year: 1998-10-2005-07
Special notes: For vehicles with side airbags, the airbag warning light must be turned off. The seating position is lowered by approximately 5mm (when using ST-JJ center hole). When installing the lowest seat position, the slide rail legs will interfere with the floor, so they must be cut.
Notes / Interference information: For RMS, adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, this can be alleviated by adjustment. For RCS, adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
D / DH / DV
DS / DS-H / DS-V / ES-V/DSE
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . In addition, any interference with the interior can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included, 2WD vehicles.

Images are for illustration purpose only. Actual product may vary.