RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA ALTEZZA ALTEZZA GITA SXE GXE10 SPORTS FRAME 2080.363.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.363.1

TOYOTA ALTEZZA ALTEZZA GITA SXE GXE10 SPORTS FRAME

Model year: 1998-10-2005-07
Special notes: The seating position is approximately 22mm lower than the lowest position of the genuine seat when a 13mm spacer (one each of 6mm and 7mm) is inserted. (When using ST-JJ) For vehicles equipped with side airbags, the airbag warning light must be turned off. *When using in competitions with the spacer removed, the seating position is approximately 35mm lower than the lowest position of the genuine seat
Notes / Interference information: SR-1 and 2 have approximately 5mm interference between the shoulder and B-pillar. For RMS, please adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・Side adapter for RCS ・Stainless steel side adapter set for RCS Late model SR-2 / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early model SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. Side airbag canceller included, 2WD vehicle.

Images are for illustration purpose only. Actual product may vary.