$268.06 SGD
| /
Brand | RECARO |
Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
Product Number | 2080.415.2 |
Compatible Car | TOYOTA CROWN ATHLETE ARS GRS2## |
Product Description | Model year: 2008-02-2012-12 Special notes: For vehicles with side airbags, the airbag warning light must be turned off. The seating position is approximately 10 mm lower than the lowest position of the original seat (when using ST-JJ center hole). The seat offset is approximately 5 mm toward the door (Recaro seat moves toward the door). The slide lever slightly interferes with the floor console at the front of the slide position. The driver's seat position sensor function will be lost. If a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on. Notes / Interference information: For D, DS, DSE, and CSE, the seat cushion side and center console slightly interfere with each other. For RMS, please adjust the position to the optimum position (front/rear height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic D / DH / DV DS / DS-H / DS-V / ES-V/DSE Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent) RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. 2WD vehicles. Installation not confirmed for vehicles equipped with the Pre-Crash Safety System. Not confirmed for Crown Hybrid and Crown Majesta. |
Notes | Images are for illustration purpose only. Actual product may vary. |