RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA COROLLA COROLLA FIELDER COROLLA RUNX ALLEX CE NZE ZZE120 121 122 123 124 129 2080.525.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.525.1

TOYOTA COROLLA COROLLA FIELDER COROLLA RUNX ALLEX CE NZE ZZE120 121 122 123 124 129

Model year: 2000-08-2006-09
Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using the center hole of ST-JJ).
Precautions / Interference information: For Trend-J, JJ, JC, D, and DC, the side of the backrest interferes with the door armrest by a few mm. For SR-1 and 2, the shoulder part interferes with the B-pillar by a few mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
D / DH / DV
DS / DS-H / DS-V / ES-V/DSE
Pro Racer RMS Please install the RMS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please install the RCS by adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD and 4WD vehicles. No side airbags.

Images are for illustration purpose only. Actual product may vary.