RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA COROLLA FIELDER COROLLA AXIO E144 DRIVER'S SEAT 2080.528.2

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2080.528.2
Compatible Car
TOYOTA COROLLA FIELDER COROLLA AXIO E144 DRIVER'S SEAT
Product Description
Model year: 2006-10-2012-05
Special notes: Almost the same as the lowest position of the genuine seat (when using ST-JJ). The forward sliding distance is reduced by about 20mm compared to genuine. There is some interference between the side of the seat cushion and the center console near the front end of the sliding position.
Notes / Interference information: The CS, CSE, CT, and C-class seats use a spacer, so the seating position will be higher by the amount of the spacer. For the RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS RMS is an optional RMS side adapter Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) must be purchased separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Vehicles without side airbags, 4WD (left seat uses 2080.526.1 for 2WD). Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.