RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA PRIUS ZVW30 35 SPORTS FRAME WITH 3-STAGE ADJUSTMENT FUNCTION 2080.542.2

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2080.542.2
Compatible Car
TOYOTA PRIUS ZVW30 35 SPORTS FRAME WITH 3-STAGE ADJUSTMENT FUNCTION
Product Description
Model year: 2009-05-2015-11
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. Factory seats without height adjusters will be lowered by approximately 25mm (when using ST-JJ center hole) (height can be adjusted up and down by approximately 13mm). Factory seats with height adjusters will be lowered by approximately 5mm from the lowest position (when using ST-JJ center hole) (height can be adjusted up and down by approximately 13mm). The forward sliding amount is reduced by approximately 20mm compared to the factory, and the backward sliding amount is also reduced by approximately 20mm compared to the factory.
Notes / Interference information: CS, CSE, CT, and C-clutch use spacers, so the seating position will be higher by the amount of the spacer. For RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS RMS can be installed using the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A side adapter set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame (3-position type). Side airbag canceller included. Including PHV vehicles. However, compatibility with vehicles equipped with optional items such as navigation units has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.