RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA CALDINA T190 195 T210 2080.544.2

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2080.544.2
Compatible Car
TOYOTA CALDINA T190 195 T210
Product Description
Model year: 1996-01-2002-08
Special notes: With 6mm spacer, the seat will be 24mm lower than the lowest position of the genuine seat. (When using ST-JJ). *When removing the spacer, the seating position will be 30mm lower than the lowest position of the genuine seat when used for competition.
Notes / Interference information: For CSE, install the left and right sides in reverse. For D, DS, DSE, install the left and right sides in reverse with the backrest width adjustment set to the narrowest. For Trend-J, JJ, JC, D, DC, the backrest side and door armrest will interfere with each other by 10-15mm. For SR-1, 2, 3, 4, 5, Sport-J, JJ, JC, D, DC, the backrest side and door armrest will interfere with each other by 5-10mm. For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the RMS side adapter (sold separately). Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
D / DH / DV
DS / DS-H / DS-V / ES-V/DSE
Pro Racer RMS RMS can be installed using the separately sold RMS side adapter . Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. No side airbags.
Notes
Images are for illustration purpose only. Actual product may vary.