RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA CELICA CAREN ZZT230 2080.554.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.554.1

TOYOTA CELICA CAREN ZZT230

Model year: 1999-08-2006-06
Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ). The forward sliding amount is reduced by about 20mm compared to the OEM.
Notes / Interference information: For LX (including Ergomed), LS, LT, and SP-#N, the side of the seat cushion interferes with the center console at the front of the sliding position. For SR-1, 2, 3, 4, 5, and new A-8, the side of the seat cushion interferes with the center console by about 10 to 15mm. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types. ・Side adapter for RCS ・Stainless steel side adapter set for RCS Late model SR-2 / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early model SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A Side Adapter Set (Product No. 1700000J) must be purchased separately. AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
TS-G / RS-G / TS-W / RS-W Side Adapter Set (Product No. 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below.

Images are for illustration purpose only. Actual product may vary.