$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2081.022.1 |
| Compatible Car | NISSAN MARCH K11 2WD VEHICLE |
| Product Description | Model year: 1992-01-2002-01 Special notes: The seating position is approximately 10mm lower than the original seat (when using ST-JJ center hole). Precautions/Interference information: For CS, CSE, CT, and C-clutch, remove the recliner cover on the center console side and use a spacer, so the seating position will be higher by the amount of the spacer. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CSE Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CT Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle C-Classic Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is interference with the interior, it can be reduced by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-JS AM19 SPORT-JS TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD vehicles. Including Cabriolet. (Enchante is listed separately) |
| Notes | Images are for illustration purpose only. Actual product may vary. |
