$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2081.027.1 |
| Compatible Car | NISSAN MARCH K12 |
| Product Description | Model year: 2002-02-2010-06 Special notes: The side airbag function built into the factory seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position is almost the same as the lowest position of the factory seat height adjustment function when the adapter frame is installed. When the adapter frame is not installed, it will be 38 mm lower (when using ST-JJ). The seat offset is about 10 mm toward the door (the Recaro moves closer to the door). Notes / Interference information: For SR-1 and 2, the shoulder part interferes with the B-pillar by a few mm. Also, for SR-1, 2, 3, 4, 5 and LX (including Ergomed), LS, and LT, when used in the rear position of the seat slide, the dial on the console side and the genuine console cover may interfere with each other due to individual differences. For CS, CSE, and C-clutch, the center console side recliner cover must be removed and a spacer must be used, so the seating position will be higher by the amount of the spacer. An armrest can be installed, but the handbrake operation will be impaired. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. One-position type. Armrest: Can be installed on the right hand side of the left seat, or the left hand side of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE C-Classic Pro Racer RMS For the RMS, please adjust to the optimal position (front to back height, left to right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD and 4WD vehicles. Side airbag canceller included. Adapter frame included with base frame. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
