$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2081.266.1 |
| Compatible Car | NISSAN SERENA C26 PASSENGER SEAT |
| Product Description | Model year: 2010-11-2016-07 Special notes: The seating position is 5mm higher than the lowest position of the genuine seat (when using ST-JJ center hole). Seat offset is 5mm (Recaro moves closer to the door). The forward sliding amount is reduced by 20mm compared to genuine. The tray on the back of the genuine seat cannot be used if it is replaced with Recaro. Notes / Interference information: For SR-3, 4, 5, the shoulder part and B-pillar interfere by 5 to 10mm. The backrest side and door armrest interfere by 5 to 10mm. When sliding front most, the seat cushion side and center panel interfere by 25mm to 30mm. For SP/STYLE/TREND-JJ, JC, DC, the backrest side and door armrest interfere by 5mm to 10mm. When sliding front most, the seat cushion side and center panel interfere by 15mm to 20mm. For the L series and Ergomed series, the backrest side and door armrest interfere with each other by approximately 5 to 10 mm. When sliding front most, the seat cushion side and center panel interfere with each other by approximately 15 to 20 mm. For the RMS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Any interference with the interior can be alleviated by adjustment. For the RCS, please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.) Armrest: Can be installed for right hand use on the left seat, and left hand use on the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the Side Adapter Set (Product No. 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Passenger seat frame. No side airbag. Compatibility with vehicles equipped with options other than the navigation unit has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
