RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR NISSAN SKYLINE R34 2WD CAR SPORTS FRAME 2081.333.1

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2081.333.1
Compatible Car
NISSAN SKYLINE R34 2WD CAR SPORTS FRAME
Product Description
Model year: 1998-05-2001-05
Special notes: For vehicles with side airbags, the airbag warning light must be turned off. The seating position is approximately 15mm lower than the lowest position of the original seat (when using ST-JJ).
Notes / Interference information: For SR-1, 2, 3, 4, and 5, the backrest side and door armrest interfere approximately 5-10mm, and the seat cushion side and center console interfere approximately 10-15mm in front of the seat slide position. For new A-8, the seat cushion side and center console interfere approximately 10-15mm in front of the seat slide position. For Style and Sport J, JJ, JC, D, and DC, the seat cushion side and center console interfere several mm in front of the seat slide position, and the backrest side and door armrest interfere approximately 5-10mm. For RMS, please adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD vehicles. Sports frame. (Normal frame is not available for R34 2WD vehicles.) Side airbag canceller included.
Notes
Images are for illustration purpose only. Actual product may vary.