RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SKYLINE CPV35 2-DOOR COUPE DRIVER'S SEAT 2081.837.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.837.2

NISSAN SKYLINE CPV35 2-DOOR COUPE DRIVER'S SEAT

Model year: 2003-01-2007-09
Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. The seating position is almost the same as the lowest position of the factory seat. The seat offset is about 15mm on the door side (the Recaro moves closer to the door).
Notes / Interference information: For SR-1 and 2, the shoulder part interferes with the B-pillar by a few mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. For CS, CSE, CT, and C-Class, the seating position will be higher due to the spacer used. For RS/TS-#, the RS/TS-G offset adapter set (product number 1700001J) is required. For RMS, please adjust the position to the optimum position (front/rear height, left/right offset 0/5/10mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS RMS is an optional RMS side adapter Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A SP-#, Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W RS/TS-# series requires RS/TS-G offset adapter set (product number 1700001J). *Normal side adapter (product number 1700000J) cannot be used. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2-door coupe. Side airbag canceller included.

Images are for illustration purpose only. Actual product may vary.