$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2081.844.1 |
| Compatible Car | NISSAN TIIDA C11 |
| Product Description | Model year: 2004-09-2012-10 Special notes: Seating position is almost the same as the OEM seat (when using ST-JJ center hole). Seat offset is approx. 15mm toward the door (Recaro moves closer to the door). Forward sliding amount is approx. 20mm less than OEM. Not confirmed for Tiida Latio. Notes / Interference information: For SR-3, 4, 5, the backrest side and door armrest interfere by a few mm. For new A-8, A-8, the shoulder part interferes by a few mm with the B-pillar. For SP-# and Racer, the shoulder part interferes by a few mm with the B-pillar, and an SP-G offset adapter set (product number 1600094J) is required. For SP-#N, the shoulder part interferes with the B-pillar by approx. 5-10 mm. For Trend-J, JJ, JC, D, DC, the backrest side and door armrest interfere by approx. 5-10 mm. For Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by a few mm. For CS and CSE, the seating position is higher due to the use of spacers. For RS/TS-# series, the handle offset can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm using the RS/TS-G offset adapter set (product number 1700001J). (Please consult your dealer regarding interference with the console side (shift, etc.) when installing.) For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Vehicles without side airbags, 2WD vehicles, and 4WD vehicles. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
