RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR NISSAN FAIRLADY Z Z34 2081.857.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2081.857.1
Compatible Car
NISSAN FAIRLADY Z Z34
Product Description
Model year: 2008-11-2022-03
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position will be 10mm higher than the lowest position of the factory seat (when using ST-JJ). Seat offset door side approx. 10mm (Recaro moves closer to the door). The forward sliding amount is reduced by 20mm compared to the factory. The rear sliding amount for TS-G/W is also reduced by 30mm.
Notes / Interference information: SR-1, 2 have approx. 10mm interference between the shoulder and B-pillar. SP-# requires the SP-G offset adapter set (product number 1600094J). When installing TS-G/W, the rear sliding amount is reduced by 30mm compared to the factory. For RS/TS-# series, the steering offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) The CT, C-clutch, CS, and CSE use spacers, so the seating position will be higher by the amount of the spacer. For the RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
New Orthoped (with Recaro vent)
RCS Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Excluding the Roadster.
Notes
Images are for illustration purpose only. Actual product may vary.