$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2082.009.2 |
| Compatible Car | MAZDA MAZDA3 BP#P |
| Product Description | Model year: 2019-05- Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags require the airbag warning light to be turned off. The seating position is 30mm higher when using the middle position of the Recaro's three-stage adjustment compared to the lowest position of the factory seat's height adjustment. Equivalent to the middle position of the factory seat's height adjustment. (Adjustable 13mm up and 13mm down). (When using New LX-F). The steering wheel offset of the Recaro seat is 9mm closer to the door. The slide position is 35mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. Notes / Interference information: Only in the passenger seat, the following seat interferes with the SC and console in front of the seat slide. AM19 (10-15mm), 190/307 (2-7mm), SR-6/7/11 (10mm), 7F/LX-F (5mm), old LX/Ergo/Ortho series (5-8 mm). SP-# racers require an offset adapter. For RS-G/TS-G series, we recommend using an offset adapter if you prioritize offset over height. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter before installing. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional seat accessories has not been confirmed. (We have provided this information for reference only, as some dealers have installed genuine optional seat heaters in vehicles with seat heaters, and the remaining genuine seat heaters are still operational even when either the driver's or passenger's seat is installed. For details, please contact a dealer that is familiar with this vehicle.) |
| Notes | Images are for illustration purpose only. Actual product may vary. |
