$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2082.015.1 |
| Compatible Car | MAZDA RX-7 FC3S |
| Product Description | Model year: 1985-10-1991-09 Special notes: The seating position is about 10mm higher than the OEM seat (when using ST-JJ). The forward sliding distance is about 50mm less than the OEM seat (the sliding becomes difficult depending on the degree of interference of the installed seat). Cautions / Interference information: For Style-J, JJ, JC, D, and DC, the backrest width adjustment is set to the narrowest when the seat is installed, and the backrest side and door armrest interfere by a few mm. For SR-1, 2, 3, 4, 5, Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by about 5 to 10 mm. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. There are interference areas with all installed seats. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
