$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2082.184.2 |
| Compatible Car | MAZDA DEMIO DE3FS 5FS 3AS JFS |
| Product Description | Model year: 2007-07-2014-09 Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). The forward sliding amount is reduced by about 20 mm compared to the genuine seat. The seat cushion and front panel interfere near the front end of the sliding position. If you want to install the seat position one step lower, you will need to cut the leg of the slide rail (front console side). Notes / Interference information: SR-1, 2 have about 10 to 15 mm interference between the shoulder and B-pillar. SP-# and Racer require the SP-G offset adapter set (product number 1600094J). CS and CSE use spacers, so the seating position will be higher by the amount of the spacer. CT and C-class have about 10 to 15 mm interference between the side of the seat cushion and the center console, and the seating position will be higher by the amount of the spacer due to the use of spacers. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This cannot be installed on seats other than those listed in the matching information below. (Includes seats without side airbags and SkyActiv seats) |
| Notes | Images are for illustration purpose only. Actual product may vary. |
