$262.80 SGD
| /
Brand | RECARO |
Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
Product Number | 2083.002.2 |
Compatible Car | MITSUBISHI EK CROSS B3# |
Product Description | Model year: 2019-03- Special notes: When replacing the passenger seat, the driver's seat must also be replaced. It is possible to replace only the driver's seat, but not only the passenger seat. The side airbag function built into the original seat will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. The seating position is almost the same as when using the center position of the Recaro's three-stage adjustment compared to the lowest position of the original seat's height adjustment function. (Adjustable 13mm up and 13mm down). The steering wheel offset is about 4mm closer to the steering wheel center than the original. The slide position is 10mm shorter than the original. When a Recaro seat is installed on the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. In addition, the tray under the passenger seat will be lost. Notes / Interference information: Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing it. Position: New structure frame. 3 heights available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please do a trial fit before installation.) Armrest: Can be installed for the right hand of the left seat or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is sold separately. Please adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10mm) and install it with the RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD and 4WD vehicles. The Recaro seat cannot be installed on the passenger seat only because it strongly interferes with the genuine bench seat. Compatibility with vehicles with optional features has not been confirmed. Side airbag canceller included. |
Notes | Images are for illustration purpose only. Actual product may vary. |