RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR MITSUBISHI TRITON KB9T 2083.546.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2083.546.2

MITSUBISHI TRITON KB9T

Model year: 2006-09-2011-08
Special notes: The seating position is about 5mm higher than the original seat (when using ST-JJ). The seat offset is about 5mm on the door side (Recaro moves closer to the door side). The forward slide amount is about 10mm less than the original, and about 20mm more backward.
Notes / Interference information: The seating position is higher for CS and CSE because a spacer is used. For SR-3, 4, and 5, the backrest side and door armrest interfere by a few mm. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For RMS, please adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. For RCS, please adjust the position to the optimum position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.