$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.003.2 |
| Compatible Car | HONDA SHUTTLE GK8 9 GP7 8 |
| Product Description | Model year: 2015-05- Special notes: For vehicles equipped with side airbags, the airbag warning light must be turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. The seating position is approximately 9 mm higher than the lowest position of the genuine seat height adjustment function, and approximately 40 mm lower than the highest position of the genuine seat height adjustment function. (When using LX-F). The handle offset of the Recaro seat is approximately 15 mm closer to the door than the genuine seat, which is approximately 6 mm closer to the door. *Depending on the seat, it can be adjusted downward by up to approximately 13 mm by changing the combination of the included spacers. For details, please refer to the manual attached to the product. Notes / Interference information: Due to the large center console, the seat cushion side and center console will interfere 10-15mm with Orthoped, AM19 Sport/Trend/Style, IS-05 SR-6/7/11, and 0-5mm with IS-05 SR-7F, LX-F, AM190 Sportster, IS-84 old LX, and Ergo. SP-# and Racer will require the SP-G offset adapter set (product number 1600094J) because the shoulder part will interfere with the B-pillar by about 5mm. For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) can be used to adjust the handle offset in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Compatible with i-side airbag system vehicles (including vehicles with the peace of mind package). Side airbag canceller included. Sports frame (spacer included). 2WD and 4WD vehicles (including hybrids). |
| Notes | Images are for illustration purpose only. Actual product may vary. |
