$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.003.2 |
| Compatible Car | HONDA FIT GK3 4 5 6 GP5 6 |
| Product Description | Model year: 2013-09-2020-01 Special notes: The passenger seat occupancy sensor function will be lost. For vehicles equipped with side airbags, the airbag warning light must be turned off. If a Recaro seat is installed on the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on. The seating position will be approximately 9 mm higher than the lowest position of the genuine seat height adjustment function, and approximately 40 mm lower than the highest position of the genuine seat height adjustment function. (When using ST-JJ). The handle offset of the Recaro seat is approximately 15 mm closer to the door side than the genuine seat, which is approximately 6 mm closer to the door side. *Depending on the seat, it can be adjusted downward by up to approximately 13 mm by changing the combination of the included spacers. For details, please refer to the manual attached to the product. Notes / Interference information: For SP-# and Racer, the shoulder part interferes with the B-pillar by approximately 5 mm, so an SP-G offset adapter set (product number 1600094J) is required. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Compatible with i-side airbag system vehicles (including vehicles with the peace of mind package). Side airbag canceller included. Sports frame (spacer included). 2WD and 4WD vehicles (including hybrids). |
| Notes | Images are for illustration purpose only. Actual product may vary. |
