$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2085.006.1 |
| Compatible Car | HONDA S660 JW5 RCS IS-05 LX-F WITHOUT ARMREST |
| Product Description | Model year: 2015-04- Special notes: The side airbag built into the factory seat will no longer function. Vehicles equipped with side airbags will require the airbag warning light to be turned off. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. The seating position will be approximately 1.5mm lower than the factory seat. (When using the New LX-F). The Recaro seat's handle offset will be approximately 18mm closer to the door. The forward sliding distance is reduced by approximately 20mm compared to the factory. Notes/Interference information: The following restrictions apply depending on the conditions (seat position, angle, etc.). For the LX-F, the shoulder part and pillar interfere by about 20 mm (driver's seat/passenger seat), the back of the seat and the door trim interfere by about 3 mm (driver's seat/passenger seat), the seat cushion and door trim interfere by about 2 mm (driver's seat), the seat cushion and center console interfere by about 1 mm in front of the slide position (driver's seat/passenger seat), the reclining dial and door trim interfere by about 5 mm (driver's seat), the belt buckle and center console interfere by about 1 mm (driver's seat), the top of the headrest and the roof interfere by up to 3 mm depending on the position and angle of the seat (driver's seat/passenger seat), and since there is little space to operate the slide lever, the slide lever is installed upside down to create space for operation. For the RCS, the belt buckle and console interfere slightly in front of the slide, and the headrest and roof interfere by 2 mm behind the slide. Also, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) with the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Cannot be installed Compatible seats: LX-F (IS-05 base) RCS Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types. ・RCS side adapter |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. For RCS, IS-05 LX-F without armrests only |
| Notes | Images are for illustration purpose only. Actual product may vary. |
