RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR HONDA FIT GR1 3 4 5 6 2085.034.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2085.034.1

HONDA FIT GR1 3 4 5 6

Model year: 2020-02-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position will be approximately 15mm higher than the lowest position of the factory seat (when the 13mm spacer attached to the New LX-F is installed). Since the seating position feels low, please use the included 13mm (6mm + 7mm) spacer between the Recaro seat and the seat rail. The steering wheel offset is approximately 12mm closer to the console than the steering wheel center, just like the factory seat. The slide position is 20mm shorter than the factory. If you install a Recaro seat in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on.
Notes / Interference information: The belt buckle shape of the left and right seats is different, so the belt buckle of the right seat will be approximately 60mm higher. For SP-#/Racer, please use the SP-G offset adapter set . When installing RS-G/TS-G, if you are more concerned about the steering wheel offset than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter. For the Sportster, the seat cushion side and center console interfere with each other by up to 5mm when in the forward sliding position. For the RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Can be installed on the right hand side of the left seat and on the left hand side of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjusting it. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Sports frame (spacer included). 2WD vehicles (GR1, 3, 5, 6). Compatibility with 4WD vehicles and vehicles equipped with options has not been confirmed.

Images are for illustration purpose only. Actual product may vary.