RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR HONDA N-WGN JH3 2085.035.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2085.035.1

HONDA N-WGN JH3

Model year: 2019-08-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is 17mm higher when using the center position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The Recaro seat's steering wheel offset is at the center of the steering wheel. The slide amount is 20mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not be turned on.
Notes / Interference information: For manual reclining models of Sportster/Cross Sportster, the reclining handle on the door side is difficult to operate, so it is installed by swapping the left and right sides. For SPORT/STYLE/TREND J, JJ, JC, D, and DC, the seat backrest side and door armrest interfere 8-16mm. For SP-#/Racer, please use the SP-G offset adapter set (product number 1600094J) to avoid interference with the B-pillar. The RMS can be adjusted to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter to reduce interference with the door armrest. The RCS can be installed by adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RCS side adapter. Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with full-time 4WD (JH4) and vehicles with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.