$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2085.080.2 |
| Compatible Car | HONDA LIFE LIFE DUNK THAT JC1 |
| Product Description | Model year: 2008-10-2014-04 Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). Notes / Interference information: For SR-1 and 2, the shoulder part and B-pillar interfere with each other by about 15 to 20 mm. For the left seat, for SR-VF, 3, 4, 5, 6, 7, 7F, and 11, the backrest side and door armrest interfere with each other by about 5 to 10 mm when the backrest angle is tilted backward. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For CS, CSE, CT, and C-Class, the seating position will be higher by the amount of the spacer because a spacer is used. If only the left seat is replaced with a Recaro, it will interfere with the genuine seat of the right seat by about 5 to 10 mm, making it difficult to slide. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the RMS side adapter sold separately. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed using the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. AT vehicles only. 2WD vehicles. Vehicles without i-side airbags. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
